Defining The Ipsec Vpn Remote Configuration - Brocade Communications Systems RFS6000 System Reference Manual

6
Configuring IPSec VPN
5. Refer to the Status field for the current state of the requests made from applet. This field
6. Click OK to use the changes to the running configuration and close the dialog.
7.

Defining the IPSec VPN remote configuration

Use the IPSec VPN Remote tab to configure the DNS and/or WINS Servers used to route packets to
the remote end of the IPSec VPN tunnel. The Remote tab is also used for defining the IP address
range used within the IPSec VPN tunnel and configuring the authentication scheme for user
permissions within the IPSec VPN tunnel.
To define the IPSEc VPN's remote configuration:
410
ESP Authentication
Select the Use ESP checkbox to define the ESP Authentication Scheme. Options
include:
Scheme
•
•
•
Mode Define the current mode used with the transform set. The mode is either Tunnel or
Transport.
displays error messages if something goes wrong in the transaction between the applet and
the controller.
Click Cancel to close the dialog without committing updates to the running configuration.
None - No ESP authentication is used with the transform set.
MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01