Brocade Communications Systems RFS6000 System Reference Manual page 100

4
Viewing network IP information
3. The Domain Name System tab displays DNS details in a tabular format.
4. Select an IP Address from the table and click the Delete button to remove the selected entry
5. Click the Add button to display a screen used to add another domain name server. For more
6. Click the Global Settings button to open a screen that allows the domain lookup to be
Adding an IP address for a DNS server
Add an IP address for a new domain server using the Add screen.
1. Click the Add button within the Domain Network System screen.
2. Enter the Server IP Address to define the IP address of the new static domain name server.
3. Refer to the Status field for the current state of the requests made from applet. This field
4. Click OK to use the changes to the running configuration and close the dialog.
5. Click Cancel to close the dialog without committing updates to the running configuration.
Configuring global settings
Use the Global Settings screen to query domain name servers to resolve domain names to IP
addresses. Use this screen to enable/disable the Domain look up, which allows you to use
commands like ping, traceroute etc. using hostnames rather than IP addresses.
86
Server IP Address
Displays the IP address of the domain name server(s) the system can use for
resolving domain names to IP addresses. Domain look up order is determined by
the order of the servers listed. The first server queried is the first server displayed.
Therefore, ensure obsolete addresses are periodically removed.
Server Type
Displays whether the DNS IP address entry has been created statically (manually)
or dynamically. The DHCP server provides the dynamic DNS IP address entry
displayed. A static DNS IP address can be created by clicking the Add button.
from the list.
information, see "Adding an IP address for a DNS server"
enabled/disabled and the domain name to be specified. For more information, see
"Configuring global settings"
The new Configuration screen displays enabling you to add IP address for the DNS Server.
displays error messages if something goes wrong in the transaction between the applet and
the controller.
on page 86.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
on page 86.
53-1001858-01