Brocade Communications Systems RFS6000 System Reference Manual page 446
Provides centralized wireless lan (wlan) configuration and management
Hide thumbs
Also See for RFS6000:
- Cli reference manual (839 pages) ,
- System reference manual (553 pages)
Table of Contents
Advertisement
6
Configuring the Radius server
Radius proxy server configuration
The controller can be configured to send Radius requests to a proxy radius server. A user's access
request is sent to a proxy server if it cannot be authenticated by a local server. The proxy server
forwards the access request to a proxy server that can authenticate the user. The proxy server
checks the information in the user access request and either accepts or rejects the request. If the
proxy target server accepts the request, it returns configuration information specifying the type of
connection service required to authenticate the user.
To configure Radius proxy server support:
1. Select Security > Radius Server from the main menu.
2. Ensure the Configuration tab is selected.
3. Select the Proxy Servers tab from the bottom of the Configuration tab.
4. To remove an existing Radius proxy server configuration from the table of configurations
5. Click the Add button at the bottom of the screen to create a new Radius proxy server
432
c.
Refer to the Status field for the current state of the requests made from applet. This field
displays error messages if something is wrong in the transaction between the applet and
the controller.
d. Click OK to use the changes to the running configuration and close the dialog.
e. Click Cancel to close the dialog without committing updates to the running configuration
The Proxy Servers tab displays the user ID suffix (index), IP address and port number of the
controller's existing proxy server configurations.
available to the controller, select the configuration and click the Delete button.
configuration.
a. Create a new Realm Name as an abbreviation to differentiate the configuration from
others with similar attributes.
b. Specify the IP Address of the new Radius proxy server.
c.
Enter the TCP/IP Port Number used by the proxy Radius server.
d. Specify a Radius Shared Secret for authenticating the Radius client.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Advertisement
Table of Contents
