Editing An Existing Wireless Filter - Brocade Communications Systems RFS6000 System Reference Manual

6. If an existing filter is now obsolete, select it from those listed and click the Delete button.
7.
8. Click the Memberships button to display a screen wherein a selected index can be added to
9. Click on the Export button to export the contents of the table to a Comma Separated Values file

Editing an existing wireless filter

Use the Edit screen to modify the properties of an existing filter. This is recommended if an existing
filter contains adequate device address information, but the allow/deny permissions need to be
changed or if only minor changes are required to the starting and ending MAC addresses. If
significant changes are required to a usable filter, consider creating a new one.
To edit an existing filter:
1. Select Security > Wireless Firewall from the main menu tree.
2. Click on the Security Policy tab.
3. Click on the Wireless Filters tab.
4. Select one of the existing ACLs from the filters list.
5. Click the Edit button at the bottom of the screen to launch a screen for editing an ACL.
6. The Client-ACL Index is used as an identifier for a MAC Address range and allow/deny ACL
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Click the Add button to create a new filter. For more information, see
filter" on page 366.
one or more existing WLANs. For more information see,
page 367
(CSV).
The user can modify an ACL Index (numerical identifier) for the ACL, and edit the starting an
ending MAC address range for the devices allowed or denied access to the controller managed
network.
designation. The available index range is 1 - 1000. However, the index is not editable, only its
starting/ending MAC range and allow/deny designation. If a new index is needed, create a new
filter.
Configuring firewalls and access control lists
"Associating an ACL with a WLAN"
6
"Adding a new wireless
on
365