Brocade Communications Systems RFS6000 System Reference Manual page 274

5
Displaying the services interface
1. Select Services from the main menu tree.
2. Refer to the Services Summary field for the following information relating to configurable
260
values within the Services main menu item.
DHCP Servers Displays whether DHCP is enabled and the current configuration. For information
on configuring DHCP Server support, see
NTP Time Management Displays whether time management is currently enabled or disabled. Network
Time Protocol (NTP) manages time and/or network clock synchronization within
the controller managed network. NTP is a client/server implementation.
Redundancy Service Displays whether Redundancy is currently enabled or disabled. One or more
controllers can be configured as members of a redundancy group to significantly
reduce the chance of a disruption in service to WLANs and associated Clients in
the event of failure of a controller or intermediate network failure. For more
information, see
Layer 3 Mobility Displays whether Layer 3 Mobility is currently enabled or disabled. Layer 3 mobility
is a mechanism which enables a Client to maintain the same Layer 3 address
while roaming throughout a multi-VLAN network. This enables the transparent
routing of IP datagrams to Clients during their movement, so data sessions can be
initiated while they roam (in for voice applications in particular). Layer 3 mobility
enables TCP/UDP sessions to be maintained in spite of roaming among different
IP subnets. For more information on configuring Layer 3 Mobility, see
mobility"
"Configuring controller redundancy and clustering"
on page 307.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
"DHCP server settings" on page 261.
on page 293.
"Layer 3
53-1001858-01