Brocade Communications Systems RFS6000 System Reference Manual page 140

4
Viewing and configuring controller WLANs
3. Click the Edit button.
4. Select the Hotspot button from within the Authentication field.
5. Once the properties of the advanced hotspot have been defined, the file can be installed on
126
Ensure Advanced is selected from within the This WLAN's Web Pages are of the drop-down
menu.
NOTE
Advanced hotspot configuration is not permissible using the controller Web UI. Refer to the
controller CLI or other advanced configuration options to define a hotspot with advanced
properties. However, the controller can still install and maintain directories containing Web
page content.
the controller and used to support the hotspot. The following parameters are required to
upload the file:
a. Specify a source hotspot configuration file. The file used at startup automatically displays
within the File parameter.
b. Refer to the Using drop-down menu to configure whether the hotspot file transfer is
conducted using FTP or TFTP.
c. Enter the IP Address of the server or system receiving the source hotspot configuration.
Ensure the IP address is valid or risk jeopardizing the success of the file transfer.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01