Brocade Communications Systems RFS6000 System Reference Manual page 444

6
Configuring the Radius server
1. Select Security > Radius Server from the main menu.
2. Ensure the Configuration tab is selected.
3. Click the
4. Set a Timeout interval (between 5 and 10 seconds) to define how long the controller waits for a
5. Set a Retires value (between 3and 6) to define the number of times the controller transmits
6. Click the Apply button to save the changes made to within the Global Settings field.
7.
430
Start the RADIUS server link to use the controller's own Radius server to authenticate
users accessing the controller managed network. Again, this is recommended as the
secondary means of authenticating users.
reply to a Radius request before retransmitting the request. The default value is 5.
Ensure the value is set long enough to compensate for the heaviest periods of data traffic
within the controller managed network.
each Radius request to the server before giving up. The default value is 3.
Click the Revert button to cancel any changes made within the Global Settings field and revert
back to the last saved configuration.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01