Brocade Communications Systems RFS6000 System Reference Manual page 430

6
Configuring IPSec VPN
3. Review the following Crypto Map attributes to determine if an existing Crypto Map requires
4. Select an existing Crypto Map and click the Edit button to modify the Crypto Map's attributes. If
5. Select an existing Crypto Map and click the Delete button to remove it from the list of available.
416
revision, deletion or if a new Crypto Map needs to be created.
Priority / Seq
Displays the numerical priority assigned to each Crypto Map.
Name
Displays the user-assigned name for this specific Crypto Map. This name can be
modified using the Edit function or a new Crypto Map can be created by clicking
the Add button.
Mode Config Displays a green checkmark for the Crypto Map used with the current interface. A
"X" is displayed next to other Crypto Maps not currently being used.
Number of Peers
Displays the number of peers used by each Crypto Map displayed.
SA Lifetime (secs)
Displays a SA Lifetime (in seconds) that forces the periodical expiration and
re-negotiation of peer credentials. Thus, continually validating the peer
relationship.
SA Lifetime (Kb) Causes the security association to time out after the specified amount of traffic (in
kilobytes) has passed through the IPSec tunnel (using the security association).
ACL ID
Displays the name of the ACL ID used for each Crypto Map.
Number of Interfaces
Displays the number of interfaces each specific Crypto Map is used with.
an entire Crypto Map requires revision, consider deleting the Crypto Map and creating a new
one using the Add function.
Refer to the definitions supplied for the Add Crypto Map screen (on the next page) to ascertain
the requirements for editing a Crypto Map.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01