Brocade Communications Systems RFS6000 System Reference Manual page 137

8. Check the Use System Name in Hotspot URL to use the System Name specified on the main
9. Check the Logout on Browser Close button to logout hotspot users from the network when they
10. Specify the maximum Hotspot Simultaneous Users to set a limit on the number of concurrent
11. Refer to the Status field for the current state of the requests made from applet. This field
12. Click OK to use the changes to the running configuration and close the dialog.
13. Click Cancel to close the dialog without committing updates to the running configuration.
Configuring an external hotspot
Selecting the external option entails hosting your own external Web server using advanced Web
content (using XML, Flash). To create a hotspot maintained by an external server:
1. Select Network > Wireless LANs from the main menu tree.
2. Select an existing WLAN from those displayed within the Configuration tab and click the Edit
3. Select the Hotspot button from within the Authentication field. Ensure External is selected from
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
NOTE
In multi-controller hotspot environments if a single controller's internal pages are configured
for authentication on the other controllers, those controllers will redirect to their own internal
pages instead. In these environments is recommended to use an external server for all of the
controllers.
Controller configuration screen as part of the hotspot address.
close their web browsers.
unique hotspot users for the selected WLAN.
displays error messages if something goes wrong in the transaction between the applet and
the controller.
button.
within the This WLAN's Web Pages are of the drop-down menu.
Viewing and configuring controller WLANs
4
123