Brocade Communications Systems RFS6000 System Reference Manual page 193

5. Click the Edit button to launch a screen used to configure radio specific parameters. For more
6. Click the Delete button to remove a radio. However, before a radio can be removed, the radio's
7.
8. Click the Reset button to reset an individual radio.
9. Click the Tools > button to displays a submneu with Reset, Run ACS and Export options.
10. Select an AP from the table and click the AP Mesh button to configure a mesh network.
11. When using clustering and the Cluster GUI feature is enabled, a drop-down menu will be
12. Click the Global Settings button to display a screen with settings applying to all radios on the
Configuring an AP Mesh Network
Use the AP Mesh screen to configure mesh network settings for the selected Access Point.
To configure AP Mesh:
1. Select Network > Access Point Radios from the main menu tree.
2. Click the Configuration tab.
3. Click the AP Mesh button to display a screen containing AP Mesh settings which apply to the
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
AP IP Address Mask
Displays the net mask address associated with the selected Access Point IP
Address.
Voice Calls Displays the current number of active voice calls for the selected radio.
information, see "Editing AP settings"
BSS mapping must be removed.
Click the Add button to add a radio. The radio must be added before the radio can be adopted.
For more information, see
Select the Reset option to reset the Access Point radio. Select the Run ACS Now option to scan
all channels and discover which radios are adopted and on what channel. ACS then analyzes
the radios' channels and moves the radio to the channel where it is least likely to have
interference from the other radios. Use the Export option to move the contents of the table to a
Comma Separated Values file (CSV).
available to select which cluster members' Access Point radios are displayed. To view Access
Point radios from all cluster members, select All from the drop-down menu. To view Access
Point radios from a specific cluster member, select that member's IP address from the
drop-down menu.
system. For more information, see
selected AP.
Viewing access point information
on page 182.
"Adding APs" on page 188.
"Configuring an AP's global settings"
4
on page 180.
179