Ap Containment - Brocade Communications Systems RFS6000 System Reference Manual

AP containment

Use the rogue AP Containment feature to provide protection from rogue Access Points by
disrupting traffic to wireless clients associated with the Rogue AP and prevents new wireless
clients from getting associated to the Rogue AP.
To configure Access Point Containment and view rogue APs:
1. Select Security > Access Point Intrusion Detection from the main menu tree.
2. Click on the AP Containment tab.
The AP Containment screen is divided into two sections, configuration and rogue AP information.
3. To enable the AP containment feature, check the Enable Containment checkbox and specify a
4. When the containment feature has been enabled and a Containment Interval has been set,
5. The rogue AP table displays the following information about known rogue APs:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Containment Interval between 20 and 5000 miliseconds.
The Containment Interval field determines the interval after which broadcast 802.11
de-authentication messages will be sent.
click the Apply button to enable the feature and save the interval value.
Index A unique numerical ID assigned by the controller for each of the known rogue APs.
Rogue BSS Mac Display a list of all know Rogue BSS MAC Addresses known to the controller.
AP intrusion detection
6
343