Brocade Communications Systems RFS6000 System Reference Manual page 53

4. Click the Restart button to reboot the controller. The controller itself does not include a
CAUTION
When rebooting the controller, the Radius Server will also be restarted regardless of its state
before the reboot.
5. Click the Shutdown button to shutdown and power off the controller.
6. Click the Show Dashboard button to display a screen with important indicators of controller
7.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
System Name
Displays the designated system name. Provide a system name serving as a
reminder of the user base the controller supports (engineering, retail, etc.).
Location
The Location parameter serves as a reminder of where the controller can be found.
Define the System Name as a specific identifier of the controller's location. Use the
System Name and Location parameters together to optionally define the controller
name by the radio coverage type it supports and physical location. For example,
"second floor engineering."
Contact
Displays a Contact value for system administration and troubleshooting. This name
should be the network administrator responsible for controller operations.
Uptime
Displays the current operational time for the device name defined within the
System Name field. Uptime is the cumulative time since the controller was last
rebooted or lost power.
Firmware
Displays the current firmware version running on the controller. This version should
be periodically compared to the most recent version available on the Brocade Web
site, as versions with increased functionality are periodically released.
AP Licenses
Displays the number of Access Point licenses currently available for the controller.
This value represents the maximum number of Access Points the controller is
licensed to adopt.
AAP Licenses
Displays the number of Adaptive AP licenses currently available for the controller.
This value represents the maximum number of AAPs the controller is licensed to
adopt.
Date (MM/DD/YYYY)
Displays the day, month and year currently used with the controller.
Time (HH:MM:SS)
Displays the time of day used by the controller.
Time Zone
Use the drop-down menu to specify the time zone used with the controller.
Adjusting the time zone will in turn, cause an adjustment to the time displayed.
Country
Use the drop-down menu to specify the correct country of operation. Selecting the
country incorrectly could render your controller as operating illegally.
hardware reset feature.
NOTE
On the Mobility RFS6000 Controller and Mobility RFS7000 Controller the shutdown command
will shutdown the controller but the fans on the controller will remain on.
health and status. For more information, see
Referencing the Details screen is recommended before new configurations are employed that
utilize increased controller bandwidth.
Click the Reset Password button to display a screen to reset the password.
Viewing the controller interface
"Controller dashboard details"
3
on page 40.
39