Configuring The Firewall - Brocade Communications Systems RFS6000 System Reference Manual

NOTE
ACEs with lower precedence are always applied first to packets. Therefore, it is advised to add more
specific entries in the ACL first then the general ones. While displaying the ACL, the entries are
displayed in an ascending order of precedence.

Configuring the firewall

Configure the Firewall to create either standard/extended ip or extended MAC access control lists.
To configure the Firewall:
1. Select Security > Wireless Firewall from the main tree menu.
2. Select the Configuration tab.
3. Select the ACL tab.
4. Add a new ACL entry as explained in
5. The Configuration tab consists of the following two fields:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
•
ACLs - existing access lists
•
Associated Rules - allow/deny rules
Configuring firewalls and access control lists
"Adding a new ACL" on page 354.
6
353