Brocade Communications Systems RFS6000 System Reference Manual page 233

5. To use this radio as a detector to identify rogue APs on your network, check the box titled
6. Select the Single-channel scan for Unapproved APs checkbox to enable the controller to detect
7.
8. Select the Enable Enhanced Probe Table checkbox to allow an AP to forward Client probe
9. Within the Radio Settings field, configure the Placement of the radio as either Indoors or
10. Select a channel for communications between the Access Point and Clients in the Desired
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
The Properties field displays the Model family for the selected Access Point. The Model is read
only and cannot be modified. The Radio Type displays the radio type (802.11bg and
802.11bgn or 802.11a and 802.11an). This value is read only and cannot be modified
Dedicate this AP as Detector AP. Setting this radio as a detector will dedicate this radio to
detecting rogue APs on the network. Dedicated detectors do not connect to by clients.
rogue devices using its only its current channel of operation.
Select the Enable Enhanced Beacon Table checkbox to allow the AP to receive beacons and
association information.
requests to the controller.
Outdoors. The setting will affect the selection channel and power levels. Default is Indoor.
Channel field.
Viewing Access Point adoption defaults
4
219