Viewing Controller Configurations - Brocade Communications Systems RFS6000 System Reference Manual

4. To reset the WAN Interface card configuration click the Reset button and the configuration
fields will be cleared.

Viewing controller configurations

Use the Configurations screen to review the configuration files available to the controller. The
details of each configuration can be viewed individually. Optionally, edit the file to modify its name
or use the file as the controller startup configuration. A file can be deleted from the list of available
configurations or transferred to a user specified location.
NOTE
To view the entire controller configuration using SNMP, the controller CLI provides a better medium
to review the entire controller configuration.
To view the Configuration files available to the controller:
1. Select Controller > Configurations from the main menu tree.
The following information is displayed in tabular format. Configuration files (with the exception
of startup-config and running-config) can be edited, viewed in detail or deleted.
2. To view the contents of a config file in detail, select a config file by selecting a row from the
table and click the View button. For more information, see
config file"
3. Select a configuration (other than the start-up-config or running config) and click the Install
button to install the file on the controller and replace the existing startup-config file.
If a file (for example, sample-config) is selected, a message displays stating, "When
sample-config is installed, it will replace start-up config. Are you sure you want to install
sample-config." Click Yes to continue.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Name
Displays the name of each existing configuration file.
Size (Bytes) Displays the size (in bytes) of each available configuration file.
Created Displays the date and time each configuration file was created. Use this
information as a baseline for troubleshooting problems by comparing event log
data with configuration file creation data.
Modified
Displays the date and time each configuration file was last modified. Compare this
column against the Created column to discern which files were modified and make
informed decisions whether existing files should be further modified or deleted.
Path Displays the path (location) to the configuration file.
on page 60.
Viewing controller configurations
"Viewing the detailed contents of a
3
59