Brocade Communications Systems RFS6000 System Reference Manual page 427

1. Select Security > IPSec VPN from the main menu tree.
2. Select the Authentication tab.
3. Define whether IPSec VPN user authentication is conducted using a Radius Server (by
4. Enter a NAS ID for the NAS port.
5. If the Radius Server radio button is selected, the following server information displays within
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
selecting the Radius radio button), by a user-defined set of names and password (by selecting
the User Table radio button) or if no authentication is used for credential verification (by
selecting the No Authentication radio button).
The profile database on the Radius server consists of user profiles for each connected network
access server (NAS) port. Each profile is matched to a username representing a physical port.
When the controller authorizes users, it queries the user profile database using a username
representative of the physical NAS port making the connection.
the Radius tab:
Type Displays whether this target server is a Primary or Secondary Radius Server.
Server IP Address Displays the IP address of the server acting as the data source for the Radius
server.
Configuring IPSec VPN
6
413