6
Configuring the Radius server
Configuring Radius users
Refer to the Users tab to view the current set of users and groups assigned for the Radius server.
The Users tab is employed when Local is selected as the Auth Data Source within the
Authentication & Accounting tab. The user information is ignored if an LDAP server is used for
authentication.
To define the Radius user permissions for controller access:
1. Select Security > Radius Server from the main menu.
2. Select the Users tab.
3. Refer to the following to assess whether an existing user can be used with the local Radius
436
server as is, requires modification or if a new user is required.
User ID
Displays the username for this specific user. The name assigned should reflect the
user's identity and perhaps their status within the controller managed network
(guest versus secure user).
Guest User
Displays whether a specific user has been defined as a guest user (with a green
check) or has been configured as permanent user. Guest users have temporary
access.
Group Name
Lists the group name that was assigned to the Radius User ID and Group.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01