Attaching An Acl On A Wlan Interface/Port - Brocade Communications Systems RFS6000 System Reference Manual

6
Configuring firewalls and access control lists
12. Refer to the Status field for the state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the controller.
13. Click OK to use the changes to the running configuration and close the dialog.
14. Click Cancel to close the dialog without committing updates to the running configuration.

Attaching an ACL on a WLAN interface/port

Use the Attach-WLAN tab to view and assign an ACL to a WLAN on the controller. If a MAC ACL is
being attached, create a ACL entry to allow an ARP with the least precedence.
NOTE
WLAN based ACLs allows users to enforce rules/ACLs on both the inbound and outbound direction,
as opposed to Layer 2 ACLs, which just support the inbound direction.
To configure a WLAN ACL:
1. Select Security > Wireless Firewall from the main menu tree.
2. Select the Security Policy tab.
3. Select the Attach-WLAN tab.
358 Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01