4. Select the Clear Report button to clear the statistic counters and begin a new data calculation.
Reviewing found probes
Refer to the Probes Found tab to view the enhanced Probe report created by the controller. The
table displays probe information collected during the AP's channel scan. The information displayed
within the Probes Found tab is read-only with no user configurable parameters.
To view the enhanced beacons table report:
1. Select Security > Enhanced Probe/Beacon Table from the main menu tree.
2. Select the Probes Found tab.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Signal Strength (dBm)
Displays the signal strength when the unadopted AP was detected.
Heard Channel
Displays the channel frequency when the unadopted AP was detected.
Heard Time
Displays the time when the unadopted AP was detected.
Configuring enhanced beacons and probes
6
461