Brocade Communications Systems RFS6000 System Reference Manual page 387

5. If the properties of an existing WLAN firewall setting fulfill to your needs but still require
6. If an existing WLAN firewall rule is now obsolete, select it from those listed and click the Delete
7.
WLAN level configuration
To add new WLAN firewall rules:
1. Select Security > Wireless Firewall from the main tree menu.
2. Click the Configuration tab.
3. Click the WLAN tab.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Client Deauthenticate
Displays whether or not wireless client deauthentication is enabled for each WLAN.
If Client Deauthenticate is enabled any associated wireless client which hit the
thresholds configured for Allowed Client denies per second will be
deauthenticated. If Client Deauthenticate is enabled a green checkmark will be
displayed. When it is disabled a red "X" will be displayed.
DHCP Trust Displays the DHCP trust status for the selected WLAN. These DHCP packets are
used to update the DHCP Snoop Table to prevent IP spoof attacks. Any DHCP
packets from a DHCP server connected to the selected WLAN is considered
trusted. By default all WLANs are not DHCP trusted. When DHCP trust is enabled, a
green checkmark is displayed. when disabled, a red 'X' is displayed.
ARP Trust Displays the ARP trust status for the selected WLAN. Trusted ARP packets are also
used to update the DHCP Snoop Table to prevent IP spoof and arp-cache-poisoning
attacks. By default, none of the WLANs are ARP trusted.
ARP Rate Displays the ARP rate threshold. The ARP threshold determines the number of ARP
packets permissible per second. Rates can be between 0 and 1000000
modification to better filter traffic, select the WLAN and click the Edit button.
button.
Click the Add button to create a new WLAN firewall rule. For more information, see
configuration" on page 373.
Configuring firewalls and access control lists
6
"WLAN level
373