Configuring Crypto Maps - Brocade Communications Systems RFS6000 System Reference Manual

6
Configuring IPSec VPN
6. Select an existing Radius Server and click the Edit button to modify its designation as a
7.
8. If you require a new Radius Server be configured, click the Add button.
9. If the User Table checkbox was selected from within the Configuration field, select the User
10. Click the Add button to display a screen used to add a new User and Password. Enter a User
11. To change an existing user's password, select the user from within the User Table and click the
12. If necessary, select an existing user and click the Delete button to remove that user from the

Configuring Crypto Maps

Crypto Maps allow you to set restrictions preventing peers with specific certificates (especially
certificates with particular DNs) from accessing selected encrypted interfaces. If restricting access,
specify a fewer number of Crypto Maps (referring to large identity sections) instead of specifying a
large number of Crypto Maps (referring to small identity sections).
To define the Crypto Map configuration:
414
Port
Displays the TCP/IP port number for the server acting as a data source for the
Radius. The default port is 1812.
Shared Secret Displays a shared secret used for each host or subnet authenticating against the
Radius server. The shared secret can be up to 7 characters in length.
primary or secondary Radius Server, IP address, port, NAS ID and shared secret password.
Brocade recommends only modifying an existing Radius Server when its current configuration
is no longer viable for providing user authentication. Otherwise, define a new Radius Server.
Select an existing server and click the Delete button to remove it from list of available Radius
Servers. Only delete a server if its configuration does not provide a valid authentication
medium.
Set this server's designation as a primary or secondary Radius Server (using the checkboxes),
define the server IP address, port and shared secret password. Click OK when completed to
save the changes.
Table tab to review the User Name and Passwords defined for use.
Name and Password and confirm. Click OK to save the changes.
Change Password button. Change and confirm the updated password.
list available within the User Table.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01