Standards Support - Brocade Communications Systems RFS6000 System Reference Manual

Standards support

Standard
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 1122 Requirements for
Internet Hosts
RFC 1519 CIDR
RFC 1542 BOOTP
RFC 2131 DHCP
RFC 1321 MD5 Message-Digest
Algorithm
RFC 1851 The ESP Triple DES
Transform
RFC 2104 HMAC: Keyed Hashing
for Message Authentication
RFC 2246 TLS Protocol Version
1.0
RFC 2401 Security Architecture
for the Internet Protocol
RFC 2403 HMAC-MD5-96 within
ESP and AH
RFC 2404 HMAC-SHA-1-96 within
ESP and AH
RFC 2405 ESP DES-CBC Cipher
Algorithm with Explicit IV
RFC 2406 IPsec
RFC 2407 Interpretation for
ISAKMP
RFC 2408 ISAKMP
RFC 2409 IKE
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Supported
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Standards support
Notes
The Mobility RF Controllers support
IP, UDP, TCP for various
management and control functions
and Controller -> AP
communications.
Full IP4 routing support is provided
on the RF Controller as well as IPv4
support on the wired / wireless
stateful inspection firewall.
BOOTP is implemented as part of
the Integrated DHCP server. BOOTP
clients are implemented on the
Mobility 5181 and Mobility 7131
Access Points.
DHCP client and server.
Implemented for IPSec VPN,
SNMPv3 and EAP-TTLS.
1
29