3. Select a record from the table and click the Edit button to modify the record. For more
Editing the details of an existing VLAN by port
To revise the configuration of an existing VLAN:
1. Select Network > Virtual LANs from the main menu tree.
2. Select an Ethernet for which you want to configure the VLAN and click on the Edit button.
3. Click OK to continue.
4. Use the Edit screen to modify the VLAN's mode, access VLAN and allowed VLAN designation.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
NOTE
For Adaptive AP to work properly with Mobility RFS7000 Controller you need to have
independent and extended WLANs mapped to a different VLAN than the ge port.
information, see
"Editing the details of an existing VLAN by port"
The system prompts you with a Port VLAN Change Warning message stating communication
disruptions could occur with the controller.
Viewing and configuring layer 2 virtual LANs
4
on page 93.
93