Configuring Snmp Trap Receivers - Brocade Communications Systems RFS6000 System Reference Manual

# Threshold Name
8 Undecrypted
received packets
9 Total Clients

Configuring SNMP trap receivers

Refer to the Trap Receivers screen to review the attributes of existing SNMP trap receivers
(including destination address, port, community and trap version). A new v2c or v3 trap receiver
can be added to the existing list by clicking the Add button.
To configure the attributes of SNMP trap receivers:
1. Select Management Access > SNMP Trap Receivers from the main menu tree.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Condition Station Range
Greater than A decimal
number
greater than
0.00 and less
than or equal
to 100.00
Greater than N/A
Configuring SNMP trap receivers
Radio Range WLAN Range
A decimal A decimal
number number
greater than greater than
0.00 and less 0.00 and less
than or equal than or equal
to 100.00 to 100.00
N/A N/A
A decimal N/A
A decimal N/A
in the range
in the range
<1-1000>
<1-1000>
7
Wireless Service Units
Range
N/A %
A decimal Count
number in the
range
<1-1000>
481