Viewing And Configuring Controller Wlans - Brocade Communications Systems RFS6000 System Reference Manual

4. Refer to the Status field for the current state of the requests made from applet. This field
5. Click Close to close the dialog.

Viewing and configuring controller WLANs

A wireless LAN (WLAN) is a local area network (LAN) without wires. WLANs transfer data through
the air using radio frequencies instead of cables. The WLAN screen displays a high-level overview of
the WLANs created for the controller managed network. Use this data as necessary to the WLANs
that are active, their VLAN assignments, updates to a WLAN's description and their current
authentication and encryption scheme.The Wireless LANs screen is partitioned into 5 tabs
supporting the following configuration activities:
•
•
•
•
•
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
NOTE
Only four parameters may be selected at any given time.
displays error messages if something goes wrong in the transaction between the applet and
the controller.
Configuring WLANs
Viewing WLAN statistics
Configuring WMM
Configuring the NAC inclusion list
Configuring the NAC exclusion list
Viewing and configuring controller WLANs
4
105