Brocade Communications Systems RFS6000 System Reference Manual page 281

3. Click the Insert button to display an editable field wherein the name and value of the DHCP
4. Name the option as appropriate, assign a Code (numerical identifier) and use the Type
5. Highlight an entry from within the Global Options screen and click the Remove button to delete
6. Click OK to save and add the changes to the running configuration and forward the updates to
7.
8. Click Cancel to close the dialog without committing updates to the running configuration
Configuring DHCP server DDNS values
The DHCP Server screen's Configuration tab can be used to display an additional DDNS screen.
Use this screen to define a DDNS domain name and address for use with the controller.
To configure a global domain name and DDNS server address:
1. Select Services > DHCP Server from the main menu tree.
2. Highlight an existing pool name from within either the Configuration or Host Pool tabs and click
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
option can be added.
drop-down options to specify a value of ip or ascii to the DHCP global option.
the name and value.
the other peer controllers comprising the mobility domain.
Refer to the Status field.
The Status is the current state of the requests made from the applet. Requests are any
"SET/GET" operation from the applet. The Status field displays error messages if something
goes wrong in the transaction between the applet and the controller.
the DDNS button at the bottom of the screen.
DHCP server settings
5
267