6. To remove an existing WLAN from the list available for WLAN assignment, select the WLAN and
Editing a WLAN assignment
The properties of an existing WLAN assignment can be modified to meet the changing needs of
your network,
To edit an exiting WLAN assignment:
1. Select Network > Access Point Radios from the main menu tree.
2. Click the WLAN Assignment tab.
3. Select a radio from the table and click the Edit button.
4. Select any of the WLANs from the table to unassign/disable it from the list of available WLANs.
5. Refer to the Status field for the current state of the requests made from applet. This field
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
click the Delete button.
The Select Radio/BSS field displays the WLANs associated to each of the BSSIDs used by the
radios within the radio table. Use Select/Change Assigned WLANs field to edit the WLAN
assignment.
displays error messages if something goes wrong in the transaction between the applet and
the controller.
Viewing access point information
4
197