Brocade Communications Systems RFS6000 System Reference Manual page 163

5. Refer to the Traffic field for the following information (both received and transmitted):
6. Refer to the RF Status field for the following information:
7.
8. Refer to the Status field for the current state of the requests made from applet. This field
9. Click OK to use the changes to the running configuration and close the dialog.
10. Click Cancel to close the dialog without committing updates to the running configuration.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Pkts per second
Displays the average total packets per second that cross the selected WLAN. The
Rx column displays the average total packets per second received on the selected
WLAN. The Tx column displays the average total packets per second sent on the
selected WLAN. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
Throughput Displays the average throughput in Mbps on the selected WLAN. The Rx column
displays the average throughput in Mbps for packets received on the selected
WLAN. The Tx column displays the average throughput for packets sent on the
selected WLAN. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
Avg Bit Speed Displays the average bit speed in Mbps on the selected WLAN. This includes all
packets sent and received. The number in black represents this statistic for the
last 30 seconds and the number in blue represents this statistic for the last hour.
Non-unicast Pkts Displays the percentage of the total packets for the selected WLAN that are
non-unicast. Non-unicast packets include broadcast and multicast packets. The
number in black represents this statistic for the last 30 seconds and the number in
blue represents this statistic for the last hour.
Avg Client Signal Displays the average RF signal strength in dBm for all Clients associated with the
selected WLAN. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
Avg Client Noise Displays the average RF noise for all Clients associated with the selected WLAN.
The number in black represents this statistic for the last 30 seconds and the
number in blue represents this statistic for the last hour.
Avg Client SNR Displays the average Signal to Noise Ratio (SNR) for all Clients associated with the
selected WLAN. The Signal to Noise Ratio is an indication of overall RF
performance on your wireless network.
Refer to the Errors field for the following information:
Average Number of Displays the average number of retries for all Clients associated with the selected
WLAN. The number in black represents this statistic for the last 30 seconds and
Retries
the number in blue represents this statistic for the last hour.
% Gave Up Pkts
Displays the percentage of packets the controller gave up on for all Clients
associated with the selected WLAN. The number in black represents this statistic
for the last 30 seconds and the number in blue represents this statistic for the last
hour.
% Non-decryptable Pkts
Displays the percentage of undecryptable packets for all Clients associated with
the selected WLAN. The number in black represents this statistic for the last 30
seconds and the number in blue represents this statistic for the last hour.
displays error messages if something goes wrong in the transaction between the applet and
the controller.
Viewing and configuring controller WLANs
4
149