Brocade Communications Systems RFS6000 System Reference Manual page 534

8
Configuring a ping
3. Refer to the following content within the Statistics tab to assess the connection with the target
520
device:
Destination IP Displays the numeric (non DNS address) destination for the device transmitted the
ping packets.
Packets Sent Displays the number of packets transmitted to the target device IP address.
Compare this value with the number of packets received to assess the connection
quality with the target device.
Packets Received Displays the number of packets received from the target device. If this number is
significantly lower than the number sent to the target device, consider removing
this device from consideration for permanent connection with the controller.
Min RTT Displays the quickest round trip time for ping packets transmitted from the
controller to its destination IP address. This may reflect the time when data traffic
was at its lowest for the two devices.
Max RTT Displays the longest round trip time for ping packets transmitted from the
controller to its destination IP address. This may reflect the time when data traffic
was at its most congested for the two devices.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01