Brocade Communications Systems RFS6000 System Reference Manual page 484

7
Configuring SNMP access
3. Refer to the fields within the V3 screen for the following information:
4. Highlight an existing v3 entry and click the Edit button to modify the password for the Auth
470
User Name Displays a read-only SNMP v3 username of operator or Admin. An operator
typically has an Access Control of read-only and an Admin typically has an Access
Control of read/write.
Access Control Displays a read-only (R) access or read/write (RW) access for the v3 user.
Read-only access allows the user (when active) to retrieve information, while
read/write access grants the user modification privileges.
Authentication
Displays the current authorization scheme used by this user for v3 access to the
controller. Click the Edit button to modify the password required to change
authentication keys.
Encryption Displays the current Encryption Standard (DES) protocol the user must satisfy for
SNMP v3 access to the controller. Click the Edit button to modify the password
required to change encryption keys.
Status Displays whether this specific SNMP v3 User Name is active on the controller. For
more information, see
Protocol and Priv Protocol.
For additional information, see
page 468
"Accessing SNMP v2/v3 statistics"
"Editing an existing SNMP v1/v2 community name"
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
on page 472.
on
53-1001858-01