Brocade Communications Systems RFS6000 System Reference Manual page 141
Provides centralized wireless lan (wlan) configuration and management
Hide thumbs
Also See for RFS6000:
- Cli reference manual (839 pages) ,
- System reference manual (553 pages)
Table of Contents
Advertisement
6. Refer to the Allow List field, and enter any IP address (for internal or external Web sites) that
7.
8. Specify the maximum Hotspot Simultaneous Users to set a limit on the number of concurrent
9. Check the Logout on Browser Close button to logout hotspot users from the network when they
10. Refer to the Status field for the current state of the requests made from applet. This field
11. Click OK to use the changes to the running configuration and close the dialog.
12. Click Cancel to close the dialog without committing updates to the running configuration.
Configuring an advanced hotspot (using the local Radius server)
The example below shows how to create and upload a customized login, failed and welcome page
onto the controller. This example uses the controller's local AAA server.
To define a hotspot using the controller's local Radius server:
1. Select Network > Wireless LANs from the main menu tree.
2. Select an existing WLAN from those displayed within the Configuration tab.
3. Click the Edit button.
4. Select the Hotspot button from within the Authentication field.
5. Select the Config... button.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
d. If using FTP, enter the User ID credentials required to transfer the configuration file from a
FTP server.
e. If using FTP, enter the Password required to send the configuration file from an FTP server.
f.
Specify the appropriate Path name to the hotspot configuration on the local system disk or
server.
g.
Once the location and settings for the advanced hotspot configuration have been defined,
click the Install button to use the hotspot configuration with the controller.
may be accessed by the Hotspot user without authentication.
Check the Use System Name in Hotspot URL to use the System Name specified on the main
Controller configuration screen as part of the hotspot address.
unique hotspot users for the selected WLAN.
close their web browsers.
displays error messages if something goes wrong in the transaction between the applet and
the controller.
Viewing and configuring controller WLANs
4
127
Advertisement
Table of Contents
