Brocade Communications Systems RFS6000 System Reference Manual page 506
Provides centralized wireless lan (wlan) configuration and management
Hide thumbs
Also See for RFS6000:
- Cli reference manual (839 pages) ,
- System reference manual (553 pages)
Table of Contents
Advertisement
7
Configuring Management Users
4. Modify the following Radius Server attributes as necessary:
5. Refer to the Status field for the current state of the requests made from applet. This field
6. Click on OK to complete the modification of the Radius Server.
7.
Adding an external Radius server
The attributes of a new Radius Server can be defined by the controller to provide a new user
authentication server. Once the server is configured and added, it displays within the
Authentication tab as an option available to the controller.
492
Radius Server Index
Displays the read-only numerical Index value for the Radius Server to help
distinguish this server from other servers with a similar configuration (if
necessary). This is not an editable value.
Radius Server IP
Modify the IP address of the external Radius Server (if necessary). Ensure this
address is a valid IP address and not a DNS name.
Address
Radius Server Port
Change the TCP/IP port number for the Radius Server (if necessary). The port
range available for assignment is from 1 - 65535.
Number of retries to
Revise (if necessary) the maximum number of times the controller retransmits a
Radius Server frame before it times out of the authentication session. The
communicate with
available range is between 0 - 100.
Radius Server
Time to wait for Radius
Revise (if necessary) the maximum time (in seconds) the controller waits for the
Server to reply
Radius Server's acknowledgment of authentication request packets before the
controller times out of the session. The configurable range is between 1 - 1000
seconds.
Encryption key shared
Enter the encryption key the controller and Radius Server share and must validate
with Radius Server
before the user authentication scheme provided by the Radius Server can be
initiated.
displays error messages if something goes wrong in the transaction between the applet and
the controller.
Click Cancel to revert back to the last saved configuration without saving any of your changes.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Advertisement
Table of Contents
