3
Viewing controller port information
3. Select a port and click the Edit button to modify the port configuration. For additional
Editing the port configuration
To modify the port configuration:
1. Select a port from the table displayed within the Configuration screen.
2. Click the Edit button.
3. Click the OK button to continue.
4. Use the Edit screen to modify the following port configurations for the selected port
48
information, see
"Editing the port configuration"
A Port Change Warning screen displays, stating any change to the port setting could disrupt
access to the controller. Communication errors may occur even if modifications made are
successful.
Optionally, select the Don't show this message again for the rest of the session checkbox to
disable the pop-up.
on page 48.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01