Brocade Communications Systems RFS6000 System Reference Manual page 59

3. Refer to the following read-only information about associated Clients:
4. Refer to the Traffic field to assess network traffic for associated APs and radios:
5. The RF Status section displays the following read-only RF radio signal information for
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Number of Clients Displays the total number of Clients currently associated to the controller.
Associated
Number of APs Adopted Displays the total number of Access Points currently adopted by the controller.
Number of Radios
Displays the total number of radios currently adopted by the controller.
Adopted
Pkts per second Displays the packet transmission rate for received and transmitted packets over
last 30 seconds and 1 hour.
Throughput Displays the traffic throughput for packets received, packets transmitted and total
packets over last 30 seconds and 1 hour.
Avg. Bit Speed Displays the average bit speed for the controller over last 30 seconds and 1 hour.
Use the average bit speed value to help determine overall network speeds and
troubleshoot network congestion.
% Non-unicast pkts Displays the percentage of non-unicast packets seen (received & transmitted) by
the controller over last 30 seconds and 1 hour. Non-unicast traffic includes both
multicast and broadcast traffic.
Broadcasted, multicasted, and flooded packets are sent over the air at the slowest
rate on every radio in the WLAN and therefore have a much larger airtime
utilization than unicast packets a greater chance of causing collisions.
associated APs and radios:
Viewing the controller interface
3
45