Brocade Communications Systems RFS6000 System Reference Manual page 435

7.
Crypto Map transform sets
A transform set is a combination of security protocols and algorithms defining how the controller
protects data.
To review, revise or add a Crypto Map transform set:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
a. Define the Seq #. The sequence number determines priority among Crypto Maps. The
lower the number, the higher the priority.
b. Provide a unique Name for this Crypto Map to differentiate it from others with similar
configurations.
c. Enter the name of the IKE Peer used to build an IPSec security association.
d. Use the ACL ID drop-down menu to permit a Crypto Map data flow using the unique
permissions within the selected ACL.
e. Select either the AH or ESP radio button to define whether the Crypto Map's manual
security association is an AH Transform Authentication scheme or an ESP Encryption
Transform scheme. The AH SPI or ESP SPI fields become enabled depending on the radio
button selected.
f. Define the In AH SPI and Auth Keys or In Esp and Cipher Keys depending on which option
has been selected.
g. Use the Transform Set drop-down menu to select the transform set representing a
combination of security protocols and algorithms. During the IPSec security association
negotiation, peers agree to use the transform set for protecting the data flow. A new
manual security association cannot be generated without the selection of a transform set.
A default transform set is available (if none are defined).
Click OK when completed to save the configuration of the Crypto Map security association.
Configuring IPSec VPN
6
421