Brocade Communications Systems RFS6000 System Reference Manual page 482

7
Configuring SNMP access
1. Select Management Access > SNMP Access > v1/v2 from the main menu tree.
2. Refer to the Community Name and Access Control parameters for the following information:
3. Highlight an existing entry and click the Edit button to modify the properties of an existing
Editing an existing SNMP v1/v2 community name
The Edit screen allows the user to modify a community name and change its read-only or
read/write designation. Since the community name is required to match the name used within the
remote network management software, it is recommended the name be changed appropriately to
match a new naming (and user) requirement used by the management software.
To modify an existing SNMP v1/v2 Community Name and Access Control setting:
468
Community Name Displays the read-only or read-write name used to associate a site-appropriate
name for the community. The name is required to match the name used within the
remote network management software. Click the Edit button to modify an existing
Community Name.
Access Control The Access Control field specifies a read-only (R) access or read/write (RW) access
for the community. Read-only access allows a remote device to retrieve
information, while read/write access allows a remote device to modify settings.
Click the Edit button to modify an existing Access Control permission.
SNMP V1/v2 community and access control definition. For more information, see
existing SNMP v1/v2 community name" on page 468.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
"Editing an
53-1001858-01