Brocade Communications Systems RFS6000 System Reference Manual page 320

5
Configuring controller redundancy and clustering
2. Configure redundancy settings using the Command Line Interface or the using the Web UI as
3. Add any redundancy group members using the Command Line Interface or using the Web UI as
4. On the Configuration tab, check the Enable Redundancy checkbox and then check the Enable
5. Click the Apply button to enable the Cluster GUI feature.
6. Once Cluster GUI is enabled a Controller field will be available in many of the Access Point and
306
described in "Configuring redundancy settings"
described in "Configuring redundancy group membership"
Cluster GUI box.
wireless client related screens. The Controller field is displays which cluster members the APs
and Clients are associated with identified by their IP address.
NOTE
When accessing the controller Web UI through a NATed interface the Cluster GUI features will
only be accessible if TCP ports 80 and 161 are opened on the router or gateway.
on page 295.
on page 300.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01