Brocade Communications Systems RFS6000 System Reference Manual page 333

2. Refer to the following information within the Discovery Profiles tab to discern whether an
3. Select an existing profile and click the Edit button to modify the profile name starting and
4. Select an existing profile and click the Delete button to remove this profile from the list of
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
existing profile can be used as is, requires modification (or deletion) or if a new discovery
profile is required.
Index Displays the numerical identifier used to differentiate this profile from others with
similar configurations. The index is supplied to new profiles sequentially.
Profile Name Displays the user-assigned name for the profile. The profile name should associate
the profile with the group of devices or area where the discovered devices are
anticipated to be located.
Start IP Address
Displays the starting numeric (non DNS) IP address from where the search for
available network devices is conducted.
End IP Address Displays the ending numeric (non DNS) IP address from where the search for
available network devices is conducted.
SNMP Version
Displays the version of the SNMP (either SNMP v2 or v3) used for discovering
available network devices.
ending IP address and SNMP version. Brocade recommends editing a profile only if some of its
attributes are still valid, if the profile is obsolete, delete it and create a new one.
available profiles.
Configuring controller discovery
5
319