Controller Management
In this chapter
NOTE
HTTPS must be enabled to access the controller applet. Ensure HTTPS access has been enabled
before using the login screen to access the controller applet.
Displaying the Management Access interface
Refer to the main Management Access interface for a high-level overview of the current controller
firmware version and the current controller log output configuration. Use this information to discern
whether a controller firmware upgrade is required (by checking the Website for a newer version)
and if the controller is outputting log data appropriately.
NOTE
When the controller's configuration is successfully updated (using the Web UI), the effected screen
is closed without informing the user their change was successful. However, if an error were to occur,
the error displays within the effected screen's Status field and the screen remains displayed. In the
case of file transfer operations, the transfer screen remains open during the transfer operation and
remains open upon completion (with status displayed within the Status field).
To display the main Management screen:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
•
Displaying the Management Access interface . . . . . . . . . . . . . . . . . . . . . . 463
•
Configuring access control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464
•
Configuring SNMP access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 466
•
Configuring SNMP traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 474
•
Configuring SNMP trap receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 481
•
Configuring Management Users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 484
Chapter
7
463