Brocade Communications Systems RFS6000 System Reference Manual page 462

6
Creating Server Certificates
3. Select the Configure the trustpoint checkbox to enable the new self signed certificate
4. Select the Automatically generate certificate with default values checkbox to create a
5. Select the Enter certificate credentials radio button to manually enter the values of a unique
6. Provide the following information for the certificate:
448
If generating a new self-signed certificate (as selected in page 2 of the wizard), the wizard
continues the installation. Use the third page of the wizard to enter a unique trustpoint name
and other credentials required to create the new certificate.
configured as a trustpoint.
certificate using values the controller assigns by default.
This option is recommended for generic certificates that do not represent a unique or custom
controller configuration.
certificate. If you anticipate using generic (default) values, consider using the Automatically
generate certificate with default values option.
Country Define the Country used in the Self-Signed Certificate. By default, the Country is
US. The field can be modified by the user to other values. This is a required field
and must not exceed 2 characters.
State Enter a State/Prov. for the state or province name used in the Self-Signed
Certificate. By default, the State/Prov. field is CA. This is a required field.
City
Enter a City to represent the city name used in the Self-Signed Certificate. By
default, the City name is San Jose. This is a required field.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01