Brocade Communications Systems RFS6000 System Reference Manual page 316

5
Configuring controller redundancy and clustering
4. Select a row, and click the Details button to display additional details for this member. For
5. Select a row and click the Delete button to remove a member from the redundancy group. The
6. Click the Add button to add a member to the redundancy group. The redundancy group should
Displaying redundancy member details
Use the Details screen (in conjunction with its parent Member screen) to display additional (more
detailed) information on the group member selected within the Member screen.
To review the details
1. Select Services > Redundancy from the main menu tree.
2. Select the Member tab.
3. Highlight a member of the group and select the Details button.
302
AAP License Count
Displays the number of Adaptive AP licenses installed on this member.
Mode
The Redundancy Mode could be Active or Standby depending on the mode
configuration on the member. Refer to the Configuration screen to change the
mode.
more information, see "Displaying redundancy member details"
redundancy group should be disabled to conduct an Add or Delete operation.
be disabled to conduct an Add or Delete operation. For more information, see
redundancy group member"
The Redundancy screen displays with the Configuration tab selected.
on page 304.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
on page 302.
"Adding a
53-1001858-01