Brocade Communications Systems RFS6000 System Reference Manual page 57

3. The Environment section displays the CPU temperature. It displays the valid threshold range
4. The CPU/Memory section displays the free memory available with the RAM.
5. The File Systems section displays the free file system available for:
Mobility RFS7000 Controller dashboard
The Dashboard screen displays the current health of the controller and is divided into fields
representing the following important diagnostics:
•
•
•
•
•
Apart from the sections mentioned above, it also displays the following status:
Redundancy State
Firmware
Management IP
Access Points
Wireless Clients
Up Time
1. Refer to the Alarms field for details of all the unacknowledged alarms generated during the
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
set by the user.
•
flash
•
nvram
•
system
Alarms
Ports
Environment
CPU/Memory
File Systems
Displays the Redundancy State of the controller. The status can be either Enabled
or Disabled.
Enabled - Defined a green state.
Disabled - Defined by a yellow state.
Displays the Firmware version of the current software running on the wireless
controller.
Displays the Management IP address of the controller.
Displays the total number of Access Points adopted by the controller.
Displays the total number of Clients associated with the controller.
Displays the actual controller uptime. The Uptime is the current operational time of
the device defined within the System Name field. Uptime is the cumulative time
since the controller was last rebooted or lost power.
past 48 hours. The alarms are classified as:
•
Critical — Denoted by a red indicator. These alarms warrant immediate attention.
•
Major — Denoted by a yellow indicator. These alarms warrant attention.
Viewing the controller interface
3
43