Configuring Ipsec Vpn Authentication - Brocade Communications Systems RFS6000 System Reference Manual

6
Configuring IPSec VPN
5. Click the Edit button (within the IP Range tab) to modify the range of existing IP addresses
6. Select an IP address range index and click the Delete button to remove this range from those
7.
8. Click Cancel to disregard the changes and revert to the last saved configuration.

Configuring IPSEC VPN authentication

If IKE is not used for establishing security associations, there is no negotiation of security
associations. Consequently, the configuration information in both systems must be the same for
traffic to be processed successfully by the IPSec resource. Select the Authentication tab to define
the credential verification mechanisms used with the IPSEC VPN configuration.
To define the IPSEc VPN authentication configuration:
412
displayed.
available within the IP Range tab.
To add a new range of IP addresses, click the Add button (within the IP Range tab) and define
the range in the fields provided. Click OK when completed to save the changes.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01