Brocade Communications Systems RFS6000 System Reference Manual page 407

1. Select Security > NAT from the main menu tree.
2. Click on the Interfaces tab.
3. Refer to the following information as displayed within the Interface tab:
4. To Edit an existing interface, select it from the list of available interfaces and click the Edit
5. If an interface is obsolete or of no use to the NAT translation process, select it and click the
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Interface
Displays the VLAN used as the inside or outside NAT type. All defined VLANs are
available from the drop-down menu for use as the interface.
Type Displays the NAT type as either:
•
•
button.
An Edit Interface screen displays allowing the user to modify the VLAN and interface type
(inside or outside).
Delete button to remove it from the list of interfaces available
Inside - The set of controller-managed networks subject to translation. These
are the internal addresses you are trying to prevent from being exposed to the
outside world.
Outside - All other addresses. Usually these are valid addresses located on
the Internet. Outside addresses pose no risk if exposed over a publicly
accessible network.
Configuring NAT information
6
393