Configuring Wmm - Brocade Communications Systems RFS6000 System Reference Manual

4
Viewing and configuring controller WLANs
5. Refer to the Retry Counts field to review the number packets requiring retransmission from the
6. Refer to the Status field for the current state of the requests made from applet. This field
7.
8. Click Close to close the dialog and re turn to the Network > Wireless LANs > Statistics screen.

Configuring WMM

Use the WMM tab to review a WLAN's current index (numerical identifier), SSID, description,
current enabled/disabled designation, and Access Category.
To view existing WMM Settings:
1. Select Network > Wireless LANs from the main menu tree.
2. Click the WMM tab.
152
controller.
displays error messages if something goes wrong in the transaction between the applet and
the controller.
Click Refresh to update the Packet Rate and Retry Count data displayed within the screen.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01