Brocade Communications Systems RFS6000 System Reference Manual page 508

7
Configuring Management Users
External Radius server settings
When using an external Radius Server with the controller, ensure that the following values are
configured on your server to ensure maximum compatibility with the controller.
Vendor ID
Radius VSAs
There are two radius VSAs used for management user authentication.
VSA Name
Brocade-Service-Type
Brocade-Login-Service
494
Vendor ID The Brocade vendor ID is 1991
Attribute Number
1
100
Type Values
•
Integer (Decimal)
•
•
•
•
•
NOTE: To configure multiple roles, this
•
Integer (Decimal)
•
•
•
NOTE: To configure multiple access
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
Monitor Role - Value is 1.
(read-only access to the controller)
Helpdesk Role - Value is 2
(helpdesk/support access to the
controller)
Nwadmin Role - Value is 4
(all wired and wireless access to the
controller)
Sysadmin Role - Value is 8.
(System administrator access)
WebAdmin Role - Value is 16
(Guest user application access)
Superuser Role - Value is 32768
(grants full read/write access to the
controller)
value can be configured multiple
times with different values for
each role.
Console Access - Value is 128
(user is allowed to login only from
console)
Telnet Access - Value is 64
(use is allowed to login only from
telnet session)
SSH Access - Value is 32
(user is allowed to login only from
ssh session )
Web Access - Value is 16
(user is allowed to login only from
web/applet)
methods, this value can be set
multiple times with different
access values, or the desired
values can be added together and
and entered as a single entry.
53-1001858-01