Unapproved Aps (Ap Reported) - Brocade Communications Systems RFS6000 System Reference Manual

6
AP intrusion detection
4. The Number of Approved APs is simply the sum of all of approved Access Point MAC Addresses
5. Click on the Export button to export the contents of the table to a Comma Separated Values

Unapproved APs (AP reported)

Use the Unapproved APs (AP Reported) tab to review Access Points detected by associated
controller Access Point radios and are restricted from operation within the controller managed
network. The criteria for restriction was defined using the Security > Access Point Intrusion
Detection > Configuration screen.
To view Access Point detected unapproved Access Points:
1. Select Security > Access Point Intrusion Detection from the main menu tree.
2. Click on the Unapproved APs (AP Reported) tab.
340
Last Seen (Seconds)
Displays the time (in seconds) the approved AP was last seen on the network.
ESSID
Displays the SSID of each approved AP.
detected.
file (CSV).
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01