Brocade Communications Systems RFS6000 System Reference Manual page 85

1. Refer to the Source field to specify the source file. Use the From drop-down menu and select
2. Use the Browse button and select a file for transfer.
3. Use the To drop-down menu (within the Target field) and select Server. This defines the
4. Use the Using drop down-menu to configure whether the log file transfer is conducted using
5. Enter the Password required to send the configuration file from an FTP server.
6. Specify the appropriate Path name to the target directory on the server. The target options are
7.
8. Click Abort at any time during the transfer process to abort the file transfer.
Transferring a file from a Server to a wireless controller
To transfer a file from a Server to the controller:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
Wireless Controller.
transfer location of the configuration file. Enter the file location marked to store the transferred
file.
FTP, TFTP, HTTP or SFTP. This field display the default port for FTP,TFTP, HTTP or SFTP. The
value in this field can be configured as required. Enter the IP Address of the server receiving
the source configuration. Ensure the IP address is valid or risk jeopardizing the success of the
file transfer. Enter the User ID credentials required to transfer the configuration file from a FTP
server.
NOTE
On the Mobility RFS7000 Controller users can also transfer files using USB or Compact Flash.
On the Mobility RFS6000 Controller users can also transfer files using USB.
different depending on the target selected.
Click the Transfer button to complete the file transfer. The Message section in the main menu
area displays the file transfer message.
Controller file management
3
71