Reviewing Found Beacons - Brocade Communications Systems RFS6000 System Reference Manual

6
Configuring enhanced beacons and probes
11. Click Apply to save any changes. Navigating away from the screen without clicking the Apply
12. Click the Revert button to undo the changes to the screen and revert to the last saved

Reviewing found beacons

Select the Beacons Found tab to view the enhanced beacons report created by the controller. The
table displays beacon information collected during the AP's channel scan. The table contains at
least 5 entries for each AP radio (channel) scan. The information displayed within the Beacons
Found tab is read-only with no user configurable parameters.
To view the enhanced beacons report:
1. Select Security > Enhanced Probe/Beacon Table from the main menu tree.
2. Select the Beacons Found tab.
3. Refer to the following information as displayed within the Beacons Found tab.
460
button results in all the changes on the screen being discarded.
configuration.
Portal MAC
Displays the MAC address of the unadopted AP detected by the enhanced beacon
supported AP.
Rogue AP MAC Displays the MAC address of the enhanced beacon supported AP.
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01