5
Configuring controller redundancy and clustering
Reviewing redundancy status
The controller is capable of displaying the status of the collective membership of the cluster. Use
this information to assess the overall health and performance of the group.
NOTE
When ETH2 of one of the group members is unplugged, the other members report that this member
as gone, but an AP will continue to be adopted by the controller with no ETH2 connectivity.
To configure controller redundancy memberships:
1. Select Services > Redundancy from the main menu tree.
The Redundancy screen displays with the Configuration tab selected.
2. Select the Status tab.
298
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01